MIL-D-85859(AS)
3.5.1.37 BIT FWD ANT, DS3. Light emitting diode, DS3, shall be provided
to indicate that ground is being applied to the FWD test relay in the
transmitter.
3.5 1.38 PCO, DS2. Light emitting diode, DS2, shall be provided to
ind cate a PCO signal has been sent by the AN/AWW-12 or AN/AWW-9 Control-
Mon tor Set.
3.5 1.39 VTR REMOTE, DS1. Light emitting diode, DS1, shall be provided to
ind cate the presence of +12 volts from the VTR REMOTE switch in the SCP.
3.5.1.40 VCO, DS10. Light emitting diode, DS10, shall be provided to
indicate that the VCO is generating RF.
3.5.1.41 -28 Vdc binding post, E3. Binding post, E3, shall provide an
input ground connection for the -28 Vdc.
3.5.1.42 +28 Vdc binding post, E4.
Binding post, E4, shall provide an
input connection for the +28 Vdc.
3.5.1.43 VTR VIDEO IN, J2. Connector, J2, shall provide an input
connection for the video generator.
3.5.1.44 Connector, J13. Connector, J13, shall connect distribution box to
the receiver, video tape recorder, and the one wire demodulator.
3.5.1.45 VTR VIDEO OUT, J3. Connector, J3, sha l be provided for
connecting the distribution box to the video mon tor.
be provided for connecting
3.5.1.46 VTR VIDEO IN, J4. Connector, J4, shal
AUDIO to the video tape recorder.
3.5.1.47 VTR AUDIO OUT, J5. Connector, J5, shall be provided for
monitoring the audio signal being recorded on the video tape recorder.
3.5.1.48 Connector, J14. Connector, J14, shall be provided for connecting
the distribution box to the SCP.
3.5.1.49 EP VIDEO OUT, J6. Connector, J6, shall be provided for monitoring
video signal from the SCP to the video tape recorder.
3.5.1.50 EP AUDIO IN, J7. Connector, J7, shall be provided to apply audio
modulation to the video signal via the SCP.
3.5.1.51 EP AUDIO OUT, J8. Connector, J8, shall be provided for monitoring
the audio signal the from the SCP.
3.5.1.52 Connector, J15. Connector, J15, shall be provided to connect the
distribution box to the transmitter.
3.5 1.53 MULTIPLEX, J9. Connector, J9, shall be provided to apply
multiplex signals to the SCP.
3.5.1.54 MOD OUT, J10. Connector, J10, shall be provided for monitoring
the modulation output of the SCP.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business